Ingeniería Civil No linealidad geométrica No linealidad del material Resortes rotacionales
Fecha de publicación :
22-jun-2020
Paginación:
187 páginas
Editor:
Universidad de Cuenca
Ciudad:
Cuenca
Código Interno :
TI;1209
Tipo:
bachelorThesis
Abstract:
The Non-Linear Static Analysis (Pushover) simulates the seismic action by applying a pattern of
lateral loads, through this analysis we can determinate the maximum capacity of the structure and
compare it with the design load. Therefore, a Pushover analysis improves the quality of the design,
providing the engineer with a more reliable prediction on the performance of a system that is under
design or research. Currently, there are commercial and free-use programs that perform nonlinear static
analysis, in which a load is applied and it increases in magnitude until the structure can no longer
resist. At this point, the stiffness of the structure is zero or may even be negative. Until this phase, a
load could be applied and the displacements could be obtained with the force method. However, having
a singular or negative define matrix, it is not possible to apply this method because it is necessary to
apply a displacement method. That is why the objective of this research is to develop the complete
curve of the nonlinear analysis of a structure, verify it by means of existing softwares that perform
this analysis, and develop an academic example in which the methodology used is explained in detail.
The results obtained will provide an information base to understand the simulation and analytical
methodology of the real behavior of the structure.
Resumen :
El Análisis Pushover o también conocido como análisis estático no lineal (NSP) simula la respuesta
sísmica de una estructura mediante la aplicación de un patrón de cargas laterales incrementales hasta
causar el colapso en la estructura. Por medio de este análisis se puede establecer la máxima capacidad
de la estructura y compararla con la carga de diseño, proporcionando al ingeniero una predicción más
confiable del comportamiento de una estructura. Actualmente existen programas comerciales y de uso
libre que realizan el análisis estático no lineal, en el cual se aplica una carga que aumenta en magnitud
hasta que la estructura no pueda resistir más. En este punto la rigidez de la estructura es nula o puede
ser incluso negativa. Hasta esta fase se podría aplicar una carga y obtener los desplazamientos con
el método de las fuerzas. Sin embargo, al tener una matriz singular o definida negativa no es posible
aplicar este método pues se requiere aplicar un método por desplazamiento. Es por ello que el objetivo
de esta investigación es desarrollar la curva completa del análisis no lineal de una estructura, verificarla
mediante programas existentes que realicen dicho análisis, y desarrollar un ejemplo académico en el cual
se explique detalladamente la metodología empleada. Los resultados que se obtengan proporcionaran
una base de información para entender la simulación y metodología analítica del comportamiento real
de la estructura.
Av. 12 de Abril y Calle Agustín Cueva, Telf: 4051000 Ext. 1311, 1312, 1313, 1314. Horario de atención: Lunes-Viernes: 07H00-21H00. Sábados: 08H00-12H00
Av. El Paraíso 3-52, detrás del Hospital Regional "Vicente Corral Moscoso", Telf: 4051000 Ext. 3144. Horario de atención: Lunes-Viernes: 07H00-19H00
Av. 12 de Octubre y Diego de Tapia, antiguo Colegio Orientalista, Telf: 4051000 Ext. 3535 2810706 Ext. 116. Horario de atención: Lunes-Viernes: 07H30-19H00