Title: | Fracture resistance analysis of CAD/CAM interim fixed prosthodontic materials: pmma, graphene, acetal resin and polysulfone |
Other Titles: | FRACTURE RESISTANCE ANALYSIS OF CAD/CAM INTERIM FIXED PROSTHODONTIC MATERIALS: PMMA, GRAPHENE, ACETAL RESIN AND POLYSULFONE |
Authors: | Calle Barros, Marcia Carolina Abril Ochoa, Diana Gabriela |
metadata.dc.contributor.advisor: | Abad Coronel, Cristian Gustavo |
metadata.dc.description.uri: | 0000-0002-5326-681X |
metadata.dc.subject.other: | CIUC::Medicina::Odontología::Restauración Dental |
Keywords: | Restauraciones provisionales Polisulfona Resina acetálica Propiedades mecánicas |
Issue Date: | 11-Dec-2023 |
metadata.dc.format.extent: | 32 páginas |
Publisher: | Universidad de Cuenca |
metadata.dc.type: | masterThesis |
Abstract: | The aim of this study was to evaluate and compare the fracture resistance of temporary
restorations made of polymethylmethacrylate (PMMA), graphene-modified PMMA (GRA),
acetal resin (AR) and polysulfone (PS) obtained by a subtractive technique (milling) using a
computer- aided design and manufacturing (CAD/CAM) system of a three-unit fixed dental
prosthesis (FDP). Meth- ods: Four groups of ten samples were fabricated for each material.
Each specimen was characterized by a compression test on a universal testing machine, all
specimens were loaded to fracture and the value in Newtons (N) was recorded by software
connected to the testing machine. The fracture mode was evaluated on all samples using a
stereomicroscope. Results: There were statistically significant differences (p value < 0.005)
between PMMA and the other three materials (PMMA: 1302.71 N; GRA:1990.02 N; RA:
1796.20 N; PS: 2234.97). PMMA presented a significantly lower value than the other materials,
and PS showed the highest value. GRA and RA presented a similar range of values but they
were still higher than those of PMMA. Conclusions: GRA, RA and PS are presented as valid
options within the range of interim milled restorative materials and as alternatives to PMMA. |
Description: | El objetivo de este estudio fue evaluar y comparar la resistencia a la fractura de restauraciones
temporales hechas de polimetilmetacrilato (PMMA), PMMA modificado con grafeno (GRA),
resina acetálica (AR) y polisulfona (PS) obtenidas mediante una técnica sustractiva (fresado)
utilizando un sistema de diseño y fabricación asistido por ordenador (CAD/CAM) de una
prótesis dental fija (FDP) de tres unidades. Métodos: Se fabricaron cuatro grupos de diez
muestras para cada material. Cada muestra se caracterizó mediante una prueba de
compresión en una máquina de prueba universal, todas las muestras se cargaron hasta
fracturarse y el valor en Newtons (N) se registró mediante un software conectado a la máquina
de prueba. El modo de fractura se evaluó en todas las muestras utilizando un
estereomicroscopio. Resultados: Hubo diferencias estadísticamente significativas (pagvalor <
0,005) entre PMMA y los otros tres materiales (PMMA:
1302,71 N; GRA: 1990,02 N; RA: 1796,20 N; PS: 2234,97). El PMMA presentó un valor
significativamente menor que los demás materiales y el PS mostró el valor más alto. GRA y
RA presentaron un rango de valores similar pero aún superiores a los de PMMA. Conclusiones:
GRA, RA y PS se presentan como opciones válidas dentro de la gama de materiales
restauradores fresados provisionalmente y como alternativas al PMMA. |
URI: | http://dspace.ucuenca.edu.ec/handle/123456789/43492 |
metadata.dc.relation.ispartof: | ODONOD;003 |
metadata.dcterms.description: | Especialista en Operatoria Dental y Estética |
Appears in Collections: | Tesis Especializaciones
|