Title: | Comparative analysis of the structural weights of fixed prostheses of zirconium dioxide, metal ceramic, PMMA and 3DPP printing resin - mechanical implications |
Other Titles: | COMPARATIVE ANALYSIS OF THE STRUCTURAL WEIGHTS OF FIXED PROSTHESES OF ZIRCONIUM DIOXIDE, METAL CERAMIC, PMMA AND 3DPP PRINTING RESIN - MECHANICAL IMPLICATIONS |
Authors: | Vélez Chimbo, David Alejandro |
metadata.dc.contributor.advisor: | Barzallo Sánchez, María Isabel |
metadata.dc.description.uri: | 0000-0001-7562-2769 |
metadata.dc.subject.other: | CIUC::Medicina::Odontología::Prostodoncia |
Keywords: | Prótesis fija Peso estructural Mecánica dental Materiales dentales |
Issue Date: | 8-Dec-2023 |
metadata.dc.format.extent: | 39 páginas |
Publisher: | Universidad de Cuenca |
metadata.dc.type: | submittedVersion |
Abstract: | The aim of this study was to determine the mechanical implications in a four-unit fixed dental prosthesis (FDP) made of 1) monolithic zirconium dioxide (ZR O2), 2) polymethylmethacrylate (PMMA), 3) metal-ceramic (PFM); and 4) impression resin (3DPP). Methods: Four groups were fabricated with 8 samples for each material (n:32), each structure was weighed, subjected to compressive tests, and then analyzed by 3D FEA. Results: PMMA presented the lowest structural weight (1.33 g); followed by 3DPP (1.98 g); ZR O2 (6.34 g), PFM (6.44 g). PMMA in fracture tests, presented compressive strength (2104.73 N), tension (351.752 MPa), followed by PFM with strength (1361.48 N), tension (227.521 MPa); ZR O2 with strength (1107.63 N) and tension (185.098 MPa); and 3DPP strength (1000.88 N) and tension (143.916 MPa). Deformation according to 3D FEA, showed: 3DPP presented the lowest degree of deformation (0.001 mm), followed by PFM (0.011 mm), ZR O2 (0.168 mm) and PMMA (1.035 mm). Conclusions: the weight of materials would not have a direct influence on the mean values obtained for strength, stress and strain. Since the performance is related to the tension and forces supported by the structures in critical zones, it could be mentioned the importance of considering design factors. |
Description: | El
objetivo de este estudio fue determinar las implicaciones mecánicas en una prótesis
dental fija FDP ) de cuatro unidades, hecha en : 1 ) dióxido de circonio monolítico ZR
O 2 ), 2 ) polimetilmetacrilato PMMA), 3) metal cerámica ( y 4) resina de impresión
( Métodos : Se fabricaron cuatro grupos con 8 muestras para cada material (n:
cada estructura fue pesada, sometida a pruebas de compresión y luego analizada por
3D FEA. Resultados: El PMMA presentó el menor peso estructural (1,33 g); seguido de
3DPP (1,98 g); ZR O 2 ( 34 g PFM (6,44 g). PMMA en pruebas de fractura , presentó
resistencia a la compresión ( 2104 73 N), tensión ( 351 752 MPa), seguido de PFM con
fuerza 1361 48 N), tensión (227.521 MPa); ZR O 2 con fuerza 1107 63 N) y tensión
(185.098 MPa); y fuerza 3DPP 1000 88 N) y tensión (143.916 MPa). La deformación
según 3D FEA , mostró: 3DPP presentó el menor grado de deformación ( 001 mm),
seguido de PFM ( 011 mm ZR O2 0 168 mm y PMMA (1,035 mm). Conclusiones: el
peso de los materiales no tendría una influencia directa en los valores medios obtenidos
para la resistencia, el estrés y la deformación. Dado que el rendimiento está relacionado
con la tensión y las fuerzas soportadas por las estructuras en zonas críticas, se podría
mencionar la importancia de considerar los factores de diseño. |
URI: | http://dspace.ucuenca.edu.ec/handle/123456789/43487 |
metadata.dc.relation.ispartof: | ODONOD;001 |
metadata.dcterms.description: | Especialista en Operatoria Dental y Estética |
Appears in Collections: | Tesis Especializaciones
|