Please use this identifier to cite or link to this item:
http://dspace.ucuenca.edu.ec/handle/123456789/43001
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Abad Coronel, Cristian Gustavo | - |
dc.contributor.author | Lupú Flores, Billy Darlin | - |
dc.contributor.author | Pacurucu Mendieta, Miguel David | - |
dc.date.accessioned | 2023-10-03T14:28:30Z | - |
dc.date.available | 2023-10-03T14:28:30Z | - |
dc.date.issued | 2023-10-03 | - |
dc.identifier.uri | http://dspace.ucuenca.edu.ec/handle/123456789/43001 | - |
dc.description | The objective of this study is to provide scientific evidence on the analysis of the structural weight of a plural fixed prosthesis of a polymeric material obtained by the additive technique (3DPP), in order to offer a viable alternative for the treatment of plural fixed prostheses and dental implants. Methods. We worked from a 3D printed resin structure of 4 dental pieces ranging from pieces 2.3 to 2.6, said structure was subjected to compressive forces that simulated the masticatory system of the human being by means of a universal test equipment, a 3D finite element analysis was carried out to determine the deformity of the material. Results. The mass of the structure was 1.98 gr, in the compressive force tests it supported a load of 1000.88 N, its stress distribution was 16.726 MPa; while its tensile strength was 143,916 MPa. In the finite element analysis of the 3DPP structure carried out in the Ansys software, a deformation with a value of 0.001mm was observed, and a stress distribution of the material of 15.36 MPa. In stress values, a minimum value of 2533.4 MPa and a maximum value of 12667 MPa were recorded. Conclusions. The structural weight of the 3DPP material was determined, providing important information to take into consideration in the use of PPF, thus verifying its functionality and performance. | en_US |
dc.description.abstract | El objetivo del presente estudio es proveer evidencia científica sobre el análisis del peso estructural de una prótesis fija plural de un material polimérico obtenida por técnica aditiva (3DPP), con la finalidad de ofrecer una alternativa viable para el tratamiento de prótesis fija plural e implantes dentales. Métodos. Se trabajó a partir de una estructura de resina impresa 3D de 4 piezas dentales que van desde las piezas 2.3 a 2.6, dicha estructura se sometió a fuerzas compresivas que simularon el sistema masticatorio del ser humano por medio de un equipo de ensayo universal, se realizó un análisis de elementos finitos 3D, para determinar la deformidad del material. Resultados. La masa de la estructura fue de 1,98 gr, en los ensayos de fuerzas compresivas soportó una carga de 1000,88 N, su distribución de tensión fue de 16,726 MPa; mientras que su fuerza tensional fue 143,916 MPa. En el análisis de elementos finitos de la estructura 3DPP realizado en el software Ansys, se observó una deformación con un valor de 0,001mm, y distribución de tensión del material de 15,36 MPa. En valores de estrés se registró un valor mínimo de 2533,4 MPa y un de máximo 12667 MPa. Conclusiones. Se determinó el peso estructural del material 3DPP, aportando información importante para tomar en consideración en la utilización de PPF, comprobando así la funcionalidad y desempeño de la misma. | en_US |
dc.description.uri | 0000-0002-5326-681x | en_US |
dc.format | application/pdf | en_US |
dc.format.extent | 22 páginas | en_US |
dc.language.iso | spa | en_US |
dc.publisher | Universidad de Cuenca | en_US |
dc.relation.ispartof | ODON;731 | - |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internacional | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.subject | Odontología | en_US |
dc.subject | Resina impresa | en_US |
dc.subject | Peso estructural | en_US |
dc.subject | Prótesis plural fija | en_US |
dc.subject.other | CIUC::Medicina::Odontología::Rehabilitación Oral | en_US |
dc.title | Análisis de peso estructural de resina de impresión Onx SprintRay para prótesis fija plural | en_US |
dc.title.alternative | ANÁLISIS DE PESO ESTRUCTURAL DE RESINA DE IMPRESIÓN ONX SPRINTRAY PARA PRÓTESIS FIJA PLURAL | en_US |
dc.type | bachelorThesis | en_US |
dcterms.description | Odontólogo | en_US |
dcterms.spatial | Cuenca, Ecuador | en_US |
dc.rights.accessRights | openAccess | en_US |
Appears in Collections: | Tesis de Pregrado |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Trabajo-de-Titulación.pdf | Versión presentada (texto completo) | 777.91 kB | Adobe PDF | View/Open |
This item is protected by original copyright |
This item is licensed under a Creative Commons License
Centro de Documentacion Regional "Juan Bautista Vázquez" | ||||||||||
|