Title: | Diseño de un sistema de tratamiento para las aguas residuales del camal municipal del cantón Girón |
Authors: | Ordóñez Pesántez, Patricia Elizabeth Quezada Ibarra, Santiago Juvenal |
metadata.dc.contributor.advisor: | García Ávila, Fausto Fernando |
metadata.dc.description.uri: | 0000-0002-9274-9769 |
metadata.dc.subject.other: | Contaminación ambiental |
Keywords: | Ingeniería Ambiental Cantón Girón Aguas residuales |
metadata.dc.ucuenca.areaconocimientounescoamplio: | 33 Ciencias Tecnológicas |
metadata.dc.ucuenca.areaconocimientounescodetallado: | 2508.11 Calidad de las Aguas |
metadata.dc.ucuenca.areaconocimientounescoespecifico: | 3308 Ingeniería y Tecnología del Medio Ambiente |
Issue Date: | 12-Apr-2023 |
metadata.dc.format.extent: | 187 páginas |
Publisher: | Universidad de Cuenca |
metadata.dc.description.city: | Cuenca |
Series/Report no.: | TIA;235 |
metadata.dc.type: | Article |
Abstract: | Girón’s municipal slaughterhouse has a wastewater treatment system with a grid and two
tanks for solids separation, which is not enough for a proper effluent treatment. Because of it,
this work’s objective was to develop a design proposal for a wastewater treatment plant
(WWTP) for this slaughterhouse. In order to that, three sampling campaigns and a
characterization of the wastewater in the laboratory were carried on, the analyzed parameters
were: total suspended solids (TSS), total nitrogen (NT), total phosphorus (P), biochemical
oxygen demand (BOD5), chemical oxygen demand (COD), fats and oils, fecal coliforms (FC)
and total coliforms (TC), these data were compared with the TULSMA environmental
regulations. Through the bibliographic review, theoretical removal efficiencies were
established, according to the treatment unit. Using the information of the physical space
available in the establishment and the population growth, three different treatment options
were sized and designed. The effluent characterization showed that the parameters: FC
(1.20E+04NMP/100ml), BOD5 (13mg/l), COD (214 mg/l), TSS (1200mg/l) CF, exceeded the
regulated permissible limit, which stablishes: FC (1.20E+04NMP/100ml), BOD5 (13mg/l), COD
(214 mg/l), TSS (1200mg/l) respectively. Finally, according to the theoretical removal
efficiencies and those calculated with CapdetWorks, it was established that the number 3
treatment option (grids, equalization tank, grease trap, coagulation/flocculation and Upflow
Anaerobic Sludge Blanket 'UASB') is the adequate, since it occupies an area of 23.03 m2,
which is within the usable area in the establishment (34.73 m2), in addition to the fact that
BOD5 is the base parameter for the design, this option presented a high BOD5 removal
efficiency (94.20% calculated and 86.74% modeled). |
Description: | El camal municipal de Girón dispone de un sistema de tratamiento de aguas residuales con
una rejilla y dos tanques para separar sólidos, esto resulta insuficiente para un adecuado
tratamiento del efluente. Por esto, el presente trabajo tuvo como objetivo desarrollar el diseño
de una planta de tratamiento de aguas residuales (PTAR) para este camal. Para ello, se
realizó un muestreo en tres campañas y una caracterización del agua residual en laboratorio,
los parámetros analizados fueron: sólidos suspendidos totales (SST), nitrógeno total (NT),
fósforo total (P), demanda bioquímica de oxígeno (DBO5), demanda química de oxígeno
(DQO), grasas y aceites, coliformes fecales (CF) y coliformes totales (CT), estos datos fueron
comparados con la normativa ambiental TULSMA. A través de literatura se establecieron
eficiencias de remoción teóricas (ERT) para cada parámetro. Utilizando información del
espacio físico disponible y del crecimiento poblacional se dimensionaron y diseñaron tres
opciones de tratamiento. La caracterización del efluente mostró que, los parámetros: CF
(1.20E+04NMP/100ml), DBO5 (13mg/l), DQO (214 mg/l), SST (1200mg/l) sobrepasan el límite
permisible normado, que establece: remoción mayor al 99.9%, 50mg/l, 100mg/l, 80mg/l,
respectivamente. Finalmente, según las ERT y eficiencias calculadas en CapdetWorks se
estableció que la opción de tratamiento 3 (rejillas, tanque de igualamiento, trampa de grasas,
coagulación/floculación y reactor anaerobio de flujo ascendente) es la adecuada, ya que
ocupa un área de 23.03m 2, siendo el área utilizable en el establecimiento (34.73m 2 ), además, siendo la DBO5 el parámetro base para el diseño, esta opción presentó alta eficiencia de remoción (94.20% calculada y 86.74% modelada). |
metadata.dc.description.degree: | Ingeniero Ambiental |
URI: | http://dspace.ucuenca.edu.ec/handle/123456789/41691 |
Appears in Collections: | Tesis de Pregrado
|