Please use this identifier to cite or link to this item:
http://dspace.ucuenca.edu.ec/handle/123456789/36056
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Dután Amay, Walter Javier | - |
dc.contributor.author | Reinoso Quinteros, Johnny Gabriel | - |
dc.contributor.author | Castro Morales, Washington Abel | - |
dc.date.accessioned | 2021-04-19T21:07:24Z | - |
dc.date.available | 2021-04-19T21:07:24Z | - |
dc.date.issued | 2021-04-19 | - |
dc.identifier.uri | http://dspace.ucuenca.edu.ec/handle/123456789/36056 | - |
dc.description | La Empresa Eléctrica Azogues C.A. en el continuo mejoramiento de sus redes de distribución, tiene implementados dispositivos inteligentes como relés y reconectadores que se mantienen en constante comunicación con el Centro de Control mediante el envío y recepción de señales analógicas y digitales, esta comunicación le permite al operador tener un conocimiento en tiempo real de la situación de la red y realizar maniobras en caso de presentarse alguna contingencia para reestablecer el servicio a la mayor cantidad de usuarios afectados. Debido a que la Empresa no cuenta con sistemas automáticos de control, estas incidencias afectan de manera negativa a la calidad del servicio técnico de la distribuidora ya que requieren de un tiempo prolongado para que los tramos fallados sean aislados de la red y la carga de los tramos sanos se restablezcan mediante la transferencia hacia otro alimentador. En el presente trabajo se analizó las condiciones normales de operación de la red conformada por los alimentadores 221 y 223 de la distribuidora, con el fin de identificar las variables necesarias para desarrollar un algoritmo de reconfiguración automática para el sistema en estudio, utilizando las señales digitales y analógicas que se obtienen de los dispositivos de protección como relés y reconectadores; la ejecución del algoritmo, luego de realizar una comprobación de señales, evalúa los distintos escenarios de falla y al cumplir las condiciones de alguno de ellos ejecuta mandos que permitan aislar el tramo fallado y de ser posible transferir el tramo sano hacia el otro alimentador. | en_US |
dc.description.abstract | Empresa Eléctrica Azogues C.A. in the continuous improvement of its distribution networks, has implemented intelligent devices such as relays and reclosers that are in constant communication with the Control Center by sending and receiving analog and digital signals, this communication allows the operator to have real-time knowledge of the situation of the network and perform maneuvers in case of any contingency to restore service to the largest number of affected users. Since the Company does not have automatic control systems, these incidents negatively affect the quality of the technical service provided by the distribution company, since they require a long time for the failed sections to be isolated from the network and the load of the healthy sections to be reestablished by transferring them to another feeder. In this work, the normal operating conditions of the network formed by feeders 221 and 223 of the distribution company were analyzed in order to identify the necessary variables to develop an automatic reconfiguration algorithm for the system under study, using the digital and analog signals obtained from the protection devices such as relays and reclosers; The execution of the algorithm, after performing a signal check, evaluates the different failure scenarios and when the conditions of any of them are met, executes commands that allow isolating the failed section and if possible transferring the healthy section to the other feeder. | en_US |
dc.format | application/pdf | en_US |
dc.language.iso | spa | en_US |
dc.publisher | Universidad de Cuenca | en_US |
dc.relation.ispartofseries | TE;483 | - |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internacional | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.subject | Ingeniería Eléctrica | en_US |
dc.subject | Recursos energéticos | en_US |
dc.subject | Automatización | en_US |
dc.subject.other | Distribución energética | en_US |
dc.title | Análisis y diseño para la reconfiguración de los alimentadores 221 y 223 de la Empresa Eléctrica Azogues C. A. | en_US |
dc.type | bachelorThesis | en_US |
dc.ucuenca.paginacion | 120 páginas | en_US |
dc.description.degree | Ingeniero Eléctrico | en_US |
dc.contributor.tutor | Quezada Morales, Diego Armando | en_US |
dc.description.city | Cuenca | en_US |
dc.ucuenca.id | 0301242459 | en_US |
dc.ucuenca.idautor | 0302712856 | en_US |
dc.ucuenca.idautor | 0302713896 | en_US |
dc.ucuenca.areaconocimientounescoamplio | 33 Ciencias Tecnológicas | en_US |
dc.ucuenca.correspondencia | wasshitomorales@gmail.com | en_US |
dc.ucuenca.correspondencia | jhonnyreinoso98@gmail.com | en_US |
dc.ucuenca.areaconocimientounescoespecifico | 3306 Ingeniería y Tecnología Eléctricas | en_US |
dc.ucuenca.areaconocimientounescodetallado | 3306.09 Transmisión y Distribución | en_US |
dc.rights.accessRights | openAccess | en_US |
dc.ucuenca.responsablerecepcion | Lopez Reinoso Maria del Carmen | en_US |
Appears in Collections: | Tesis de Pregrado |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Trabajo de Titulación.pdf | Versión presentada (texto completo) | 4.65 MB | Adobe PDF | View/Open |
This item is protected by original copyright |
This item is licensed under a Creative Commons License
Centro de Documentacion Regional "Juan Bautista Vázquez" | ||||||||||
|