Extrusion Maquinas Empresas Metodos De Trabajo Produccion Canton Cuenca Ingeniería Industrial
Issue Date:
2015
metadata.dc.ucuenca.paginacion:
180 páginas
metadata.dc.description.city:
Cuenca
Series/Report no.:
TN;434
metadata.dc.type:
bachelorThesis
Abstract:
In the present job, it was performed the extrusion capacity calculation of SM-35 extruder machine in Continental Tire Andina S.A. It was made with the purpose of know if with the installed capacity is factible the fulfilment of sidewall production of radial construction. This project has 4 chapters that are detailed below.
The first chapter talks about general background of Continental Tire Andina S.A., such as the tires production process, description of extrusion process and the extruder machine.
The second chapter contains definitions about method studies, and describes the standard method of sidewalls extrusion, with the help of diagrams and procedures. Also, in this chapter it was performed a general analysis of the workplace such as risk identification, and finally, it was given some solutions and recommendations for the identified factors.
The third chapter defines the concepts and methods related to the take times. Here it develops the respective studies and the take of the times of the extrusion process (Set Up) to get the standard times.
Finally, in the fourth chapter it shows the definitions and the calculations of theoretical capacity and real capacity of extruder SM-35 machine.
Description:
En el presente trabajo, se realizó el cálculo de la capacidad de extrusión de la máquina extrusora SM-35 en la Empresa Continental Tire Andina S.A., esto con la finalidad de conocer si con la capacidad instalada es factible el cumplimiento de la producción de laterales de construcción radial. Para ello dicho trabajo está estructurado en 4 capítulos detallados a continuación.
El Capítulo I: trata sobre antecedentes generales de la empresa Continental Tire Andina S.A., como es el caso del proceso de producción de llantas, descripción del proceso de extrusión y máquina de extrusión.
El Capítulo II: contiene definiciones sobre el estudio de métodos, y describe el método estándar de extrusión de laterales, esto con ayuda de diagramas y procedimientos. También se hace un análisis general del entorno de trabajo como es la identificación de riesgos, dando soluciones y recomendaciones a los factores identificados.
El Capítulo III: define los métodos y conceptos referentes a la toma de tiempos, en el mismo se realiza el respectivo estudio y toma de tiempos del proceso de extrusión (Set Up), para obtener el tiempo estándar.
Finalmente en el capítulo IV: se presenta las definiciones y los cálculos respectivos de la capacidad teórica y real de la máquina extrusora SM-35.
Av. 12 de Abril y Calle Agustín Cueva, Telf: 4051000 Ext. 1311, 1312, 1313, 1314. Horario de atención: Lunes-Viernes: 07H00-21H00. Sábados: 08H00-12H00
Av. El Paraíso 3-52, detrás del Hospital Regional "Vicente Corral Moscoso", Telf: 4051000 Ext. 3144. Horario de atención: Lunes-Viernes: 07H00-19H00
Av. 12 de Octubre y Diego de Tapia, antiguo Colegio Orientalista, Telf: 4051000 Ext. 3535 2810706 Ext. 116. Horario de atención: Lunes-Viernes: 07H30-19H00