Please use this identifier to cite or link to this item:
http://dspace.ucuenca.edu.ec/handle/123456789/43492
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Abad Coronel, Cristian Gustavo | - |
dc.contributor.author | Calle Barros, Marcia Carolina | - |
dc.contributor.author | Abril Ochoa, Diana Gabriela | - |
dc.date.accessioned | 2023-12-11T21:49:54Z | - |
dc.date.available | 2023-12-11T21:49:54Z | - |
dc.date.issued | 2023-12-11 | - |
dc.identifier.uri | http://dspace.ucuenca.edu.ec/handle/123456789/43492 | - |
dc.description | El objetivo de este estudio fue evaluar y comparar la resistencia a la fractura de restauraciones temporales hechas de polimetilmetacrilato (PMMA), PMMA modificado con grafeno (GRA), resina acetálica (AR) y polisulfona (PS) obtenidas mediante una técnica sustractiva (fresado) utilizando un sistema de diseño y fabricación asistido por ordenador (CAD/CAM) de una prótesis dental fija (FDP) de tres unidades. Métodos: Se fabricaron cuatro grupos de diez muestras para cada material. Cada muestra se caracterizó mediante una prueba de compresión en una máquina de prueba universal, todas las muestras se cargaron hasta fracturarse y el valor en Newtons (N) se registró mediante un software conectado a la máquina de prueba. El modo de fractura se evaluó en todas las muestras utilizando un estereomicroscopio. Resultados: Hubo diferencias estadísticamente significativas (pagvalor < 0,005) entre PMMA y los otros tres materiales (PMMA: 1302,71 N; GRA: 1990,02 N; RA: 1796,20 N; PS: 2234,97). El PMMA presentó un valor significativamente menor que los demás materiales y el PS mostró el valor más alto. GRA y RA presentaron un rango de valores similar pero aún superiores a los de PMMA. Conclusiones: GRA, RA y PS se presentan como opciones válidas dentro de la gama de materiales restauradores fresados provisionalmente y como alternativas al PMMA. | en_US |
dc.description.abstract | The aim of this study was to evaluate and compare the fracture resistance of temporary restorations made of polymethylmethacrylate (PMMA), graphene-modified PMMA (GRA), acetal resin (AR) and polysulfone (PS) obtained by a subtractive technique (milling) using a computer- aided design and manufacturing (CAD/CAM) system of a three-unit fixed dental prosthesis (FDP). Meth- ods: Four groups of ten samples were fabricated for each material. Each specimen was characterized by a compression test on a universal testing machine, all specimens were loaded to fracture and the value in Newtons (N) was recorded by software connected to the testing machine. The fracture mode was evaluated on all samples using a stereomicroscope. Results: There were statistically significant differences (p value < 0.005) between PMMA and the other three materials (PMMA: 1302.71 N; GRA:1990.02 N; RA: 1796.20 N; PS: 2234.97). PMMA presented a significantly lower value than the other materials, and PS showed the highest value. GRA and RA presented a similar range of values but they were still higher than those of PMMA. Conclusions: GRA, RA and PS are presented as valid options within the range of interim milled restorative materials and as alternatives to PMMA. | en_US |
dc.description.uri | 0000-0002-5326-681X | en_US |
dc.format | application/pdf | en_US |
dc.format.extent | 32 páginas | en_US |
dc.language.iso | spa | en_US |
dc.publisher | Universidad de Cuenca | en_US |
dc.relation.ispartof | ODONOD;003 | - |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internacional | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.subject | Restauraciones provisionales | en_US |
dc.subject | Polisulfona | en_US |
dc.subject | Resina acetálica | en_US |
dc.subject | Propiedades mecánicas | en_US |
dc.subject.other | CIUC::Medicina::Odontología::Restauración Dental | en_US |
dc.title | Fracture resistance analysis of CAD/CAM interim fixed prosthodontic materials: pmma, graphene, acetal resin and polysulfone | en_US |
dc.title.alternative | FRACTURE RESISTANCE ANALYSIS OF CAD/CAM INTERIM FIXED PROSTHODONTIC MATERIALS: PMMA, GRAPHENE, ACETAL RESIN AND POLYSULFONE | en_US |
dc.type | masterThesis | en_US |
dcterms.description | Especialista en Operatoria Dental y Estética | en_US |
dcterms.spatial | Cuenca, Ecuador | en_US |
dc.rights.accessRights | openAccess | en_US |
Appears in Collections: | Tesis Especializaciones |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Trabajo-de-Titulación.pdf | Versión presentada (texto completo) | 2.76 MB | Adobe PDF | View/Open |
This item is protected by original copyright |
This item is licensed under a Creative Commons License
Centro de Documentacion Regional "Juan Bautista Vázquez" | ||||||||||
|