Por favor, use este identificador para citar o enlazar este ítem:
http://dspace.ucuenca.edu.ec/handle/123456789/37164
Registro completo de metadatos
Campo DC | Valor | Lengua/Idioma |
---|---|---|
dc.contributor.author | Juela Quintuña, Diego Marcelo | - |
dc.contributor.author | Vera Cabezas, Luisa Mayra | - |
dc.contributor.author | Cruzat Contreras, Christian Americo | - |
dc.contributor.author | Alvarez Palomeque, Lourdes Ximena | - |
dc.contributor.author | Vanegas Peña, Maria Eulalia | - |
dc.date.accessioned | 2021-10-27T18:03:47Z | - |
dc.date.available | 2021-10-27T18:03:47Z | - |
dc.date.issued | 2021 | - |
dc.identifier.issn | 0045-6535 | - |
dc.identifier.uri | https://www.sciencedirect.com/science/article/abs/pii/S0045653521011589?via%3Dihub | - |
dc.description.abstract | Having rigorous mathematical models is essential for the design and scaling of adsorption columns. In this study, the dynamic behavior of the sulfamethoxazole adsorption on sugarcane bagasse was studied and compared using analytical models and a theoretical mechanistic model. Initially, fixed-bed column tests were carried out at different flow rates and bed heights. Then, the experimental data were fitted with the most widely used analytical kinetic models, and their fit and fixed-bed parameters were compared with the mechanistic model. Of all analytical models analyzed, the Log-Gompertz model was the one that had the best agreed with experimental data. Although some analytical models fitted the experimental data accurately, their usefulness was questionable. Their parameters did not show a clear relationship with the change in operating conditions, and in certain cases had different behavior from that observed in experimentation. Conversely, the mechanistic model not only predicted the break through curves with great accuracy in the initial and transition stage (R2 > 0.92; SSE < 0.06), but it also estimated relevant parameters. Additionally, the effects of the global mass transfer coefficient (Ki) and the axial dispersion coefficient (Dz) on breakthrough curves were studied using the mechanistic model. Increasing Ki increased the slope of the breakthrough curves with a faster adsorption rate. Similarly, high values of Dz produced lower adsorption capacities of the adsorbent; and it was established that the axial dispersion is relevant in SMX adsorption on SB. The theoretical model presented can be used for the design, scaling, and optimization of adsorption columns. | - |
dc.language.iso | es_ES | - |
dc.source | Chemosphere | - |
dc.subject | Analytical models | - |
dc.subject | Fixed-bed column | - |
dc.subject | Dynamic simulation | - |
dc.subject | Wastewate treatment biosorptio | - |
dc.subject | Breakthrough curve | - |
dc.title | Mathematical modeling and numerical simulation of sulfamethoxazole adsorption onto sugarcane bagasse in a fixed-bed column | - |
dc.title.alternative | null | - |
dc.type | ARTÍCULO | - |
dc.ucuenca.idautor | 0302396718 | - |
dc.ucuenca.idautor | XDA362792 | - |
dc.ucuenca.idautor | 0107985681 | - |
dc.ucuenca.idautor | 0103184362 | - |
dc.ucuenca.idautor | 0103168118 | - |
dc.identifier.doi | 10.1016/j.chemosphere.2021.130687 | - |
dc.ucuenca.version | Versión publicada | - |
dc.ucuenca.areaconocimientounescoamplio | 07 - Ingeniería, Industria y Construcción | - |
dc.ucuenca.afiliacion | Juela, D., Universidad de Cuenca, Facultad de Ciencias Químicas, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Vera, L., Universidad de Cuenca, Facultad de Ciencias Químicas, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Cruzat, C., Universidad de Cuenca, Facultad de Ciencias Químicas, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Alvarez, L., Universidad de Cuenca, Facultad de Ciencias Químicas, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Vanegas, M., Universidad de Cuenca, Facultad de Ciencias Químicas, Cuenca, Ecuador | - |
dc.ucuenca.correspondencia | Vanegas Peña, Maria Eulalia, eulalia.vanegas@ucuenca.edu.ec | - |
dc.ucuenca.volumen | Volumen 280 | - |
dc.ucuenca.indicebibliografico | SCOPUS | - |
dc.ucuenca.factorimpacto | 1.63 | - |
dc.ucuenca.cuartil | Q1 | - |
dc.ucuenca.numerocitaciones | 0 | - |
dc.ucuenca.areaconocimientofrascatiamplio | 2. Ingeniería y Tecnología | - |
dc.ucuenca.areaconocimientofrascatiespecifico | 2.4 Ingeniería Química | - |
dc.ucuenca.areaconocimientofrascatidetallado | 2.4.2 Ingeniería de Procesos Químicos | - |
dc.ucuenca.areaconocimientounescoespecifico | 071 - Ingeniería y Profesiones Afines | - |
dc.ucuenca.areaconocimientounescodetallado | 0711 - Ingeniería y Procesos Químicos | - |
dc.ucuenca.urifuente | https://www.sciencedirect.com/journal/chemosphere/vol/280/suppl/C | - |
Aparece en las colecciones: | Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
documento.pdf | document | 1.55 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está protegido por copyright original |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.
Centro de Documentacion Regional "Juan Bautista Vázquez" | ||||||||||
|