Please use this identifier to cite or link to this item:
http://dspace.ucuenca.edu.ec/handle/123456789/34299
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Minchala Avila, Luis Ismael | - |
dc.contributor.author | Vazquez Rodas, Andres Marcelo | - |
dc.contributor.author | Velasco Gordillo, Anthony Javier | - |
dc.contributor.author | Blandin Segarra, Jonnathan Mauricio | - |
dc.contributor.author | Astudillo Salinas, Darwin Fabian | - |
dc.date.accessioned | 2020-05-14T01:09:05Z | - |
dc.date.available | 2020-05-14T01:09:05Z | - |
dc.date.issued | 2019 | - |
dc.identifier.isbn | 9781450372886 | - |
dc.identifier.issn | 0000-0000 | - |
dc.identifier.uri | http://dspace.ucuenca.edu.ec/handle/123456789/34299 | - |
dc.identifier.uri | https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85076834636&origin=inward | - |
dc.description | his paper presents the design and implementation of a low cost, yet robust, three degrees of freedom (DoF) lower limb exoskeleton intended to assist patients in gait rehabilitation. The majority of patients with incomplete spinal cord injuries (SCI) are able to walk after a rehabilitation process. Among the broad options of physical rehabilitation therapies, there is a relatively recent interest in those assisted by robotic exoskeletons, due to features as high precision movements and automated repetitions. In this context, the subsystems of the exoskeleton prototype described throughout this paper are the following: i) a controlled area network (CAN) communications bus with SDO protocol; and, ii) a hierarchical control system consisting of two levels: a trajectory generator of the walk biomechanics implemented in a centralized controller (CC), and distributed controllers (DC) installed at each joint of the exoskeleton. The multiplication mechanical system uses reduction speed boxes based on cycloidal and planetary gears. Experimental results of the prototype operating, with and without carrying weight, show effectiveness of the whole control system for tracking a non-pathological gait biomechanics trajectory. | - |
dc.description.abstract | © 2019 Association for Computing Machinery. This paper presents the design and implementation of a low cost, yet robust, three degrees of freedom (DoF) lower limb exoskeleton intended to assist patients in gait rehabilitation. The majority of patients with incomplete spinal cord injuries (SCI) are able to walk after a rehabilitation process. Among the broad options of physical rehabilitation therapies, there is a relatively recent interest in those assisted by robotic exoskeletons, due to features as high precision movements and automated repetitions. In this context, the subsystems of the exoskeleton prototype described throughout this paper are the following: i) a controlled area network (CAN) communications bus with SDO protocol; and, ii) a hierarchical control system consisting of two levels: a trajectory generator of the walk biomechanics implemented in a centralized controller (CC), and distributed controllers (DC) installed at each joint of the exoskeleton. The multiplication mechanical system uses reduction speed boxes based on cycloidal and planetary gears. Experimental results of the prototype operating, with and without carrying weight, show effectiveness of the whole control system for tracking a non-pathological gait biomechanics trajectory. | - |
dc.language.iso | es_ES | - |
dc.publisher | Association for Computing Machineryacmhelp@acm.org | - |
dc.source | ACM International Conference Proceeding Series | - |
dc.subject | Control | - |
dc.subject | Exoskeleton | - |
dc.subject | Instrumentation system | - |
dc.subject | Lower limb | - |
dc.subject | CAN | - |
dc.title | Low cost lower limb exoskeleton for assisting gait rehabilitation: design and evaluation | - |
dc.type | ARTÍCULO DE CONFERENCIA | - |
dc.description.city | Praga | - |
dc.ucuenca.idautor | 0105099949 | - |
dc.ucuenca.idautor | 0103907036 | - |
dc.ucuenca.idautor | 0105972319 | - |
dc.ucuenca.idautor | 0301453486 | - |
dc.ucuenca.idautor | 0301496840 | - |
dc.identifier.doi | 10.1145/3365265.3365276 | - |
dc.ucuenca.version | Versión publicada | - |
dc.ucuenca.areaconocimientounescoamplio | 09 - Salud y Bienestar | - |
dc.ucuenca.afiliacion | Vazquez, A., Universidad de Cuenca, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Astudillo, D., Universidad de Cuenca, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Blandin, J., Universidad de Cuenca, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Velasco, A., Universidad de Cuenca, Cuenca, Ecuador | - |
dc.ucuenca.afiliacion | Minchala, L., Universidad de Cuenca, Cuenca, Ecuador | - |
dc.ucuenca.correspondencia | Minchala Avila, Luis Ismael, ismael.minchala@ucuenca.edu.ec | - |
dc.ucuenca.volumen | Volumen 0 | - |
dc.ucuenca.indicebibliografico | SCOPUS | - |
dc.ucuenca.numerocitaciones | 0 | - |
dc.ucuenca.areaconocimientofrascatiamplio | 2. Ingeniería y Tecnología | - |
dc.ucuenca.pais | REPUBLICA CHECA | - |
dc.ucuenca.conferencia | 3rd International Conference on Automation, Control and Robots | - |
dc.ucuenca.areaconocimientofrascatiespecifico | 2.11 Otras Ingenierias y Tecnologías | - |
dc.ucuenca.areaconocimientofrascatidetallado | 2.11.2 Otras Ingenierias y Tecnologías | - |
dc.ucuenca.areaconocimientounescoespecifico | 091 - Salud | - |
dc.ucuenca.areaconocimientounescodetallado | 0915 - Terapia y Rehabilitación | - |
dc.ucuenca.fechainicioconferencia | 2019-10-11 | - |
dc.ucuenca.fechafinconferencia | 2019-10-13 | - |
dc.ucuenca.organizadorconferencia | ICACR | - |
dc.ucuenca.comiteorganizadorconferencia | ICACR | - |
dc.ucuenca.urifuente | http://www.icacr.org | - |
Appears in Collections: | Artículos |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
documento.pdf | document | 1.83 MB | Adobe PDF | View/Open |
This item is protected by original copyright |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
Centro de Documentacion Regional "Juan Bautista Vázquez" | ||||||||||
|